Knock Sensor 22060-30P00 Compatible With Altima Frontier Maxima NX Pathfinder Pickup Quest Sentra Xterra Mercury Villager Infiniti

Description

Product Size

Length: 5.30cm

Width: 3.50cm

Height: 1.90cm

Product Weight

0.048kg

Packing Size

Length: 19.00cm

Width: 17.00cm

Height: 4.00cm

Packing Weight

0.065kg

Replacement Part Number: 22060-30P00 A53-600 M01 2206056E11, F3XY12A699A

Describe the 3rd product corresponding to the failure problem

1.Incorrect air and fuel mixture: If the air to fuel ratio is incorrect, this can lead to ignition problems Deposits in the cylinder: Dirt, grime and contaminants can get into the cylinder and create all kinds of problems. 2.Defective, unhealthy or incorrect spark plugs: the wrong type of spark plugs, plugs with deposit buildup or incorrect spark gap can lead to poor spark or incorrect spark timing 3.Improper timing: Sparks not firing at the correct time can lead to poor spark or incorrect spark timing, causing abnormal combustion in the engine cylinders 4.Your Toyota's oil pressure switch or oil pressure sensor communicates with your engine's computer and will turn on the oil light if the oil pressure is low. In some cases, they can fail due to oil leaks and must be replaced to prevent catastrophic damage to the engine

Product optimization and solution points

1.The detonation sensor is used to measure the degree of engine shake, easy to install, stable performance, strong resistance. The ignition advance angle is adjusted when the engine shakes, thus ensuring the proper operation of the vehicle. 2.Knock sensors are used to protect the engine and help reduce engine power, and are built to accurately determine the vibration generated by a knock and effectively generate a voltage signal for your vehicle's computer. 3.The knock sensor is a device used to prevent knocking or sparking. Sensing sensitive, fuel-saving and environmental protection, smooth acceleration, improve power, eliminate cylinder noise and fault codes, effectively solve the problem of failure. Protect the engine mechanical parts, high quality parts, safe, stable and durable.

The location where the product is installed

1.The burst sensor is located on the engine block or screwed into the side of the block or under the intake microfolders, thus generating an input voltage that the ECM uses to measure dynamic engine vibrations

The composition and material quality of the product

1.Made of high quality metal material with ABS plastic material, durable and corrosion resistant, in strict quality control, stable features and high reliability. 2.Made of good material, durable and corrosion resistant, effectively solve the problem of failure. Protect the engine mechanical parts, high quality parts, safe, stable and durable.

Description 4 Solve and help

1.A knock sensor is a device used to prevent knocking or spark popping. It is used to detect engine knocking or sound, which is caused by abnormal combustion in the engine cylinder. Eliminates cylinder rattling and fault codes to effectively solve malfunction problems. Protects engine mechanical components 2.This burst sensor is designed to respond to high burst frequencies, adapts to shifts in engine burst frequency, making it a more flexible sensor that responds to the correct engine burst in a wide range of vehicle conditions accurately determines the vibration generated by the burst and efficiently generates a voltage signal for your vehicle's computer 3.The burst sensor is used to eliminate cylinder rattles and fault codes for effective troubleshooting Protects mechanical engine components sending signals to the Engine Control Module (ECM) to adjust timing and prevent detonation or spark bursts

Confidence in quality

1.Consistent OEM specifications to ensure perfect fit of related parts - Durable and reliable use of material qualifications - Multidisciplinary testing such as balanced housing durability wheel load limiting seals, etc. to improve the quality of each unit 2.Made of high quality materials under strict quality control, stable characteristics and high reliability, the ignition detonation sensor allows the vehicle computer to monitor the combustion chamber, advance or delay ignition and valve timing or injector pulse width for optimal engine performance

Description 5 Service & Maintenance

1.12 months warranty. If there is any problem during the one-year quality warranty period, please feel free to contact us for a free replacement or refund

Product Tips

1.To avoid mistakes, please double check our product photos to make sure our products are the same as your old parts and have the same sockets. And please make sure your vehicle type is in the parts description on the back. 2.Please note - Please check the car's build model trim engine, product appearance and part number to make sure this is the correct part you need. If you have any questions, please contact us for answers 3.Please double check the connectors and insert your old parts into our pictures to make sure they are the same before purchase. Failure to do so can lead to compatibility issues and easy return issues

Compatible With INFINITI: G20 2.0 Saloon 1990-1997 J30 3.0 Saloon 1992-1997 Q45 I 4.1 Saloon 1993-1996 Q45 I 4.5 Saloon 1989-1993 Q45 III (F50) 4.5 Saloon 2001- QX4 3.3 Closed Off-Road Vehicle 1997- Compatible With NISSAN: 100 NX (B13) 2.0 GTI Coupe 1991-1994 200 SX (S14) 2.0 i 16V Coupe 1993-1999 200 SX (S14) 2.0 i 16V Turbo Coupe 1993-1999 300 ZX (Z32) 3.0 Twin Turbo Coupe 1990-1995 ALMERA I Hatchback (N15) 2.0 GTi Hatchback 1996-2000 ALMERA TINO (V10) 2.0 MPV 2000-2003 ALTIMA (L30) 2.4 Saloon 1997-2001 MAXIMA / MAXIMA QX IV (A32) 2.0 Saloon 1995-2000 MAXIMA / MAXIMA QX IV (A32) 3.0 Saloon 1995-2000 MAXIMA / MAXIMA QX IV Station Wagon (A32) 3.0 QX Estate 1997-2000 PATHFINDER II (R50) 3.3 V6 4WD Closed Off-Road Vehicle 1997-2004 PICK UP (D21) 3.0 i V6 4WD Pickup 1990-1998 PRIMERA (P10) 2.0 16V Saloon 1990-1996 PRIMERA (P10) 2.0 16V 4x4 Saloon 1991-1996 PRIMERA (P10) 2.0 GT Saloon 1990-1996 PRIMERA (P10) 2.0 i Saloon 1995-1996 PRIMERA (P11) 2.0 16V Saloon 1996-2001 PRIMERA Hatchback (P10) 2.0 Hatchback 1990-1996 PRIMERA Hatchback (P10) 2.0 16V Hatchback 1990-1996 PRIMERA Hatchback (P10) 2.0 16V 4x4 Hatchback 1991-1996 PRIMERA Hatchback (P10) 2.0 i Hatchback 1995-1996 PRIMERA Hatchback (P11) 2.0 16V Hatchback 1996-2002 PRIMERA Traveller (W10) 2.0 i Estate 1990-1998 PRIMERA Traveller (WP11) 2.0 16V Estate 1996-2001 QUEST (V40) 3.0 MPV 1992-1998 SERENA (C23) 2.0 MPV 1992-2001 SUNNY III Hatchback (N14) 2.0 GTI 16V Hatchback 1990-1995 SUNNY III Hatchback (N14) 2.0 GTI-R 4x4 Hatchback 1990-1995 SUNNY III Liftback (N14) 2.0 i 16V Hatchback 1990-1995 TERRANO I (WD21) 3.0 i 4WD Closed Off-Road Vehicle 1990-1995

Shop Policies

Payment Policy

Payment Policy – Trend369.Shop

At Trend369.Shop, we are committed to providing a secure and convenient payment experience for all our customers.

1. Accepted Payment Methods

We accept the following payment methods:

Credit and Debit Cards (Visa, MasterCard, American Express)

Online Payment Gateways (such as PayPal, Stripe, or other secure providers)

Other payment options as displayed at checkout

All payments must be completed at the time of purchase.

2. Secure Transactions

Your security is our priority. All transactions are encrypted and processed through secure payment gateways to protect your personal and financial information.

3. Payment Confirmation

Once your payment is processed, you will receive an order confirmation email with your purchase details.

4. Pricing & Currency

All prices are listed in the applicable currency shown on the website. Trend369.Shop reserves the right to update prices at any time without prior notice.

5. Failed or Declined Payments

If your payment is declined or fails, please verify your payment details or contact your bank. Orders will not be processed until payment is successfully completed.

6. Refunds

Refunds, when applicable, will be processed in accordance with our Refund Policy and returned to the original payment method used for the purchase.

Delivery Policy

Delivery Policy – Trend369.Shop

At Trend369.Shop, we strive to deliver your orders quickly, safely, and efficiently.

1. Processing Time

All orders are processed within 1–3 business days after payment confirmation. Orders are not processed or shipped on weekends or public holidays.

2. Shipping Time

Estimated delivery times vary depending on your location:

Domestic Orders: 3–7 business days

International Orders: 7–15 business days

Please note that delivery times are estimates and may vary due to customs procedures, carrier delays, or unforeseen circumstances.

3. Shipping Fees

Shipping fees are calculated at checkout based on your location and selected shipping method. Any applicable customs duties or import taxes are the responsibility of the customer.

4. Order Tracking

Once your order has been shipped, you will receive a confirmation email with tracking information (if available), allowing you to monitor your delivery status.

5. Delivery Issues

If your package is delayed, lost, or arrives damaged, please contact our customer support team within 7 days of the expected delivery date. We will work with the shipping carrier to resolve the issue as quickly as possible.

6. Incorrect Address

Customers are responsible for providing accurate shipping information. Trend369.Shop is not responsible for orders shipped to incorrect addresses provided at checkout.

Refund Policy

Refund Policy – Trend369.Shop

At Trend369.Shop, customer satisfaction is important to us. If you are not completely satisfied with your purchase, we’re here to help.

1. Returns Eligibility

You may request a return within 14 days of receiving your order. To be eligible for a return:

The item must be unused and in the same condition that you received it.

The item must be in its original packaging.

Proof of purchase (order confirmation or receipt) is required.

Certain items such as clearance products, gift cards, or personal care items may not be eligible for return.

2. Non-Refundable Items

The following items are non-refundable:

Final sale or clearance items

Gift cards

Items damaged due to misuse or improper handling

3. Return Process

To initiate a return, please contact our customer support team with your order number and reason for return. Once approved, you will receive instructions on how to send the item back.

Customers are responsible for return shipping costs unless the item was defective or incorrect.

4. Refund Process

After we receive and inspect the returned item:

You will be notified of the approval or rejection of your refund.

If approved, the refund will be processed to your original payment method within 5–10 business days.

Please note that processing times may vary depending on your bank or payment provider.

5. Damaged or Incorrect Items

If you receive a damaged, defective, or incorrect item, please contact us within 7 days of delivery with photos of the item and packaging. We will arrange a replacement or full refund at no additional cost.

6. Late or Missing Refunds

If you haven’t received your refund:

Check your bank account again.

Contact your credit card company, as processing times may vary.

If the issue persists, please contact our support team.